1.Remove key from ignition switch.(移除钥匙）
2.Close all doors.（关闭所有车门）
3.Open drivers door.（打开驾驶员侧门）
4.Insert key and turn to ON position and within 10 seconds turn key off and remove key.（插入钥匙打到on,10秒内关闭并移除钥匙）
5.Within 20 seconds Close and open drivers door 3 times.（20秒内开关驾驶员侧门三次）
6.Insert key and turn to ON position and within 10 seconds turn key off and remove key.（插钥匙打到on,10秒内关闭并移除钥匙）
7.Locks should now lock and unlock automatically to confirm you have entered programming mode.（此时门锁会自动关开以确认进入编程模式）
8.Press the UNLOCK button on remote and locks should cycle to confirm programming.（按遥控器上开锁键，门锁应该循环来确认编程进行中）
9.Repeat step 8 on each additional remote.（在每个遥控器上重复第8步）
10.Exit vehicle with keys and remote,close door test remote(s).（拿走钥匙，关闭车门，测试遥控器是否管用）
